Effecfs of Cross-Correlation Between Real Noise in Transient Process of Single-Mode and Imaginary Parts of Colored Pump Laser

A two-dimensional single-mode laser model with cross-correlation between the real and imaginary parts of the colored quadric pump noise is investigated. A novel laser amplitude Langevin equation is obtained, in which the cross-correlation λp between the real and imaginary parts of the pump noise appears. The mean, variance, and skewness of first-passage-time are calculated. It is shown that the mean, variance, and skewness of first-passage-time are strongly affected by λp.     

Statistical analysis of findings in external and internal audits and assessments in a testing laboratory

A statistical analysis of findings in assessments by an accreditation body, external audits and internal audits in an accredited testing laboratory for gamma-ray spectrometry is presented. The frequencies of observations reported in different areas were examined and analysed. The differences are interpreted in terms of the varying importance associated with the different areas as perceived by auditors and assessors.     

Pulsed pump: Thermal effects in solid state lasers under super-Gaussian pulses

Solid state laser (SSL) powers can be realistically scaled when pumped by a real, efficient and multimode pulse. In this work, a fourth-order super-Gaussian pulse was assumed as a pump for SSL’s and a complete analytical expression for the thermal phase shift is given. Moreover, the focal length of thermal lens in paraxial ray approximation regime was studied. The results when applied to a Ti: sapphire crystal show an appreciable correction for abberation compared to a top-hat pulse.     

Design and electro-optical characterization of Si-based resonant cavity light emitting devices at 850 nm

We report on the fabrication and characterization of Si/SiO₂ Fabry-Perot microcavities. These structures are used to enhance the external quantum efficiency along the cavity axis and the spectral purity of emission from silicon rich oxide films that are used as active media to fabricate a Si based RCLED (resonant cavity light emitting devices). A new structure to electrically pump the active media in the resonant cavity has been designed. These structures are fabricated by chemical vapour deposition on a silicon substrate. The microcavities are tuned at 850 nm and present a quality factor ranging from 17 to 150 depending on the number of pairs constituting the dielectric mirrors. An enhancement of the electro and photoluminescence (PL) signal of 20 times is achieved for the selected emission wavelength. These cavities are characterized by TEM analysis to evaluate film uniformity, thicknesses and the densification after annealing processes for temperature ranging from 800 to 1100 °C. The electrical properties of the active media are analyzed. The electroluminescence spectral features are compared with PL spectra correlated with the quality factor of the cavities. The photometric diagram shows also a high directionality of the emitted light within a 30° cone from the sample normal.     

Constructions of External Difference Families and Disjoint Difference Families

External difference families (EDFs) are a type of new combinatorial designs originated from cryptography. In this paper, some earlier ideas of recursive and cyclotomic constructions of combinatorial designs are extended, and a number of classes of EDFs and disjoint difference families are presented. A link between a subclass of EDFs and a special type of (almost) difference sets is set up.     

离心泵在启动阶段的水力特性研究

针对工作的离心泵,分析了其内部流体的流动情况,建立了在非稳定工况下操作的理论扬程公式,非稳态理论扬程包括旋转加速附加扬程和水流加速消耗扬程以及由于流动速度变化引起泵壳中的附加压力而产生的扬程。在离心泵的启动阶段,对其在不同阀门开度下的水力性能进行了试验研究。测量了瞬时转速、流量、扬程随时间的变化关系,并把试验结果进行修正。由于启动时一部分扬程用来提供流体加速,压力传感器测量不到,因此必须把试验扬程加以修正。将理论计算与修正的试验结果进行了比较分析,两者基本吻合。     

离心泵快速启动过程外部特性的试验研究

介绍离心泵快速启动试验装置和试验方法,对一台出口直径为80 mm的小型管道离心泵进行试验研究,分别测试了试验泵的稳态性能和各项瞬态性能,比较分析了两者的区别。结果显示,启动过程中,离心泵的扬程紧跟转速到达最大值,转速稳定后的瞬态性能与稳态假设对应,流量和扬程的上升历程与管路阻力特性直接相关,而转速与其基本无关; 在启动初始阶段,无量纲扬程呈现很大值,继而迅速减小到低于稳态假设值,表现出明显的瞬态效应。     

外控弱周期电流约束下电极B-Z反应体系中的时间自组织

以经典BZ化学反应体系的三变量Oregonator模型及电极过程动力学为基础,提出了外控弱周期电极电流约束下电极BZ反应体系与体相BZ反应体系相互耦合的动力学模型.在体相处于稳定定态参数条件下,系统地研究了外控弱周期电流约束下电极BZ反应体系中的动力学行为,定量分析了电流慢变流型上的准定态稳定性及有利于出现极限环振荡区域.研究表明,与以前所报道的外控弱周期电位约束情况类似,在外控弱周期电流约束下电极BZ反应体系中的极限环振荡区域亦发生了蜕变,但体系对外控电流约束中的这种持续性之周期扰动的响应表现在两个方面:有利于出现极限环振荡区域的缩变及原非振荡区胁迫振荡的出现.     

基于分布参数模型的CO_2蒸发器结构参数研究

在设计工况下,建立了用于跨临界二氧化碳热泵热水器的套管式蒸发器的稳态分布参数模型,对其结构参数进行了敏感性分析,指出了它们的合理变化范围:管内套1根管时,内管外径应至少大于11.00mm,低于13.00mm,外管内径应在20.00mm以上,23.00mm以下;管内套多根管时,以管内套3根管的性能为最优。优化设计结果对开发二氧化碳蒸发器产品具有一定的指导意义。     

线阵激光二极管侧面抽运Nd∶YAG激光器特性研究

依据四能级系统速率方程 ,推导出了多横模振荡固体激光器输出与输入参量的关系。对二极管抽运固体激光器中线阵激光二极管三向对称侧面抽运结构 ,计算了抽运光强分布 ,并就激光器的阈值抽运功率、近阈值条件下的斜率效率、输出功率和光束质量等与抽运参量的关系 ,进行了数值计算。由计算结果看出 ,线阵激光二极管侧面抽运Nd∶YAG激光器中晶体半径和抽运光束腰半径是影响输出激光功率和光束质量的主要因素 ,并通过在谐振腔中加小孔选模 ,使光束质量得到明显改善。选择了一组三向侧面抽运结构参量进行了实验验证 ,实验结果与理论计算一致。